Jet spray leaking or broken? What to check before you call
03/11/2026A jet spray (health faucet) works hard every day, so small parts wear out first. Before you book, a two-minute check usually tells you what is wrong.
Water leaks from the handle
The rubber seal or the trigger valve inside the spray head has worn out. Replacing the head, or the whole set, fixes it. Tightening will not help.
Water leaks along the hose
Look for a bulge or a crack in the braided hose. A damaged hose can burst without warning, so replace it rather than taping it.
Water drips at the wall or the angle valve
Close the angle valve, then gently tighten the connection by hand and a quarter turn with a spanner. If it still weeps, the washer or thread tape needs replacing.
Weak or sideways spray
Mineral build-up blocks the small holes. Soaking the head in vinegar and water for an hour often clears it. If not, a new head is cheap.
When to book a technician
If the valve will not close, the leak is inside the wall, or the thread is damaged, stop using it and book a plumber. Describe the problem and add a photo when you book so the technician can estimate the cost before the visit.
Describe the problem and add a photo, and a technician can estimate the cost before the visit.
Book a service